Category: Technical Tips

As a solution provider and master distributor to many industry leading suppliers, Arctic Traveler Canada will provide tips to enable troubleshooting and enhance the customer experience.

Heaters- Troubleshoot from the ground up

RedDot
Quick Heater Service Tip from Reddot
  • When the status is “heater fan doesn’t work,” check the ground connection for rust, paint, grime, or some other obstruction at the terminus.
  • If the motor doesn’t have a ground wire, its mount serves as a ground connection. Make sure nothing impedes the mount’s ground path.
  • Use a multimeter to make sure you’re getting full voltage to the motor. Once you know the voltage is adequate, you can then look for worn brushes, dirty squirrel-cage fans, damaged fan blades, and other more typical motor problems.