Espar Hydronic Heaters
Espar Hydronic heaters are integrated in the cooling system of the engine and work independently of the engine, thus offers pre-heating of the engine and the vehicle’s passenger compartment. The thermal energy gained is then distributed through the vehicle’s own heat exchanger as forced hot air and this heats the interior of the vehicle via existing air vents. The engine is warmed up with the residual heat in the cooling water.
Pre-Season Preventative Maintenance For Hydronic Heaters
Before the cold weather arrives, it’s recommended that your Espar HYDRONIC heaters receive a preseason check to ensure the heater is clean, free running and ready for a trouble free season. Please use the recommended tools and follow the procedures as outlined in the heater manual while removing and reinstalling the different heater components. heater(s) are clean, free running and ready for a trouble free season. The heaters should be inspected and repaired by an Espar trained mechanic, as follows:
1. Check all electrical connections from the heater to the batteries. Check for wear and abrasion along the length of the harnesses. Repair or replace the harness whenever the harness insulation is broken or damaged. Check the battery connections. Clean any corrosion at the terminals. Replace the battery terminals if the corrosion is severe. Check the fuse for corrosion and the correct rating.
2. Check all clamps and hoses. Replace as required.
3. Check the condition of the exhaust system. Check for holes and breaks in the exhaust piping. Replace the exhaust as necessary.
4. Check the fuel pump filter ‐ clean or replace as necessary. For heaters with external fuel pumps, ensure mounting angle of the fuel pump is in between 15‐35o. An incorrectly mounted fuel pump may lead to excessive carbon issues. Check the fuel lines for possible leaks, loose clamps, etc. Once the entire fuel system has been checked and any issues corrected, it is advisable to do a fuel quantity check.
5. Check and clear clogged weep holes on the side of the heater body. Look for any indication of coolant leakages. If leakage is suspected then remove cover with water pump assembly and inspect and replace “O” rings on water pump housing. Closely inspect the heater waterjacket for leakages and replace “O” ring between waterjacket and heat exchanger. If the waterjacket is cracked, replace it.
6. Remove and replace the glow pin screen. Make sure that the new screen is installed correctly as outlined in the repair manual for the heater.
7. Remove and check the glow pin. If it shows signs of dissimilar color or if the glow pin is in any way distorted, replace it.
8. The coolant pump should be removed and the impeller checked for damage. Any dirt or metal particles on the impeller magnet should be removed and the cavity in the pump should also be cleaned. Please Note: coolant pumps are not covered by warranty if the vehicle’s coolant system is excessively contaminated. Refer to Technical Circular 250.
9. Remove the flame tube and check the condition of the flame tube end. The flame tube should be light brown in color with no excessive carbon on the end of the flame tube. Check for carbon build up on the burner “nose” at the cold end of the flame tube. Any carbon covering the air slots should be removed. Check the inside of the heat exchanger and scrape any loose carbon out from between the fins in the heat exchanger. Re‐install the flame tube replacing all gaskets.
10. Re‐assemble the heater and test operation. The heater should be bench tested for 15‐20 minutes before returning the heater to the vehicle.
11. Regardless of the season, run the heater every month for a minimum period of 15 minutes. This will help the heater to burn away any combustion residue in the burner chamber and prevent corrosion in the waterjacket and decay of “O”rings
Arctic Traveler Canada is a MSD (Master Distributor) for Eberspaecher products and a technical leader actively involved in projects driving the mobility of tomorrow. Call 1-800-295-4156 for more information about mobile heating solutions.
When it comes to air conditioning a good preventative maintenance program will increase operating time and save money by identifying concerns before they become problems. Once the hot weather arrives, implementing planned maintenance allows you to schedule repairs versus reacting to sudden unexpected issues. A/C filters, coils, and fins require regular maintenance to ensure optimum performance and neglecting necessary maintenance ensures a steady decline in performance and increases energy use.
Clogged, dirty filters restrict airflow and reduce a system’s efficiency. When airflow is restricted, the air that by bypasses the filter will carry dirt directly into the evaporator coil and reduce the coils heat absorbing abilities. To ensure efficiency routinely clean or replace filters.
The condenser and evaporator coils collect dirt over time but a clean filter helps to keep the evaporator performing. Debris reduces air flow, insulates the coil and reduces it’s ability to absorb heat. Being exposed to the elements, you can easily see dirt collecting on the fins. Cleaning the coil fins and removing any debris around the coil will ensure optimal performance.
The aluminum fins on evaporator and condenser coils are easily bent and can block airflow through the coil. Air conditioning wholesalers sell a tool called a “fin comb” that will comb these fins back into nearly original condition.Remember to always use caution when performing preventative system maintenance, as ambient conditions (heat load) will increase refrigerant hose temperatures and don’t forget having the right quality parts on hand makes all the difference.
See How To and Which Components to Inspect and watch this video to learn more about Basic A/C Troubleshooting.
Arctic Traveler Canada is a manufacturer and master distributor for a wide range of industry leading mobile heating solutions for every application.
Designed to perform and engineered to improve operator comfort, productivity and reduce maintenance costs, we have a solution to suite your needs.
From 16-65,000 BTU’s, our Cabin, Headliner and Rooftop auxiliary heaters will supplement your Gas or Diesel needs and provide hours of comfort.
|Airtronic series – From the smallest on the market D2 to the 27,300 BTU’s D8, ESPAR uses innovative heating technology to provide great comfort and warmth for every application, with pleasant temperatures prevailing on cabin entry.
Hydronic series – 7,170-17,755 BTU – Fuel-powered water heater used to heat the cabin and or the engine and to de-ice the windows (defrost). The heater’s compact design, with its integrated water pump and fuel metering pump (in the diesel version), saves time when installing the heater.
RedDOT Heaters. The most Versatile and maintenance free
|R250 series 16-30 BTU’s – Round tube and fin design allows heater mounting in any position, using multi-position leg brackets or flush mount frame. The compact size, simple plumbing and high output are ideal in any application.
R290 & R295- Single or Double Blower – 20-35,000 BTU’s – The big brother of the pair with two high performance three-speed motor blower assemblies, delivers where it’s needed most.
R3500– 49,000 BTU’s – This crew cab heater was designed to be able to heat larger cabs in extreme conditions. Its low profile and heavy duty construction allows for use in various applications.
ATC Heaters – Versatile and maintenance free
|892059 – 27,000 BTU’s , 892041 – 40,000 BTU’s, 892002 – 65,000 BTU’s|
Available in 12V & 24V, these auxiliary heaters are designed to heat larger cabs in extreme conditions. With a high performance 3 speed blower assembly, compact size, simple plumbing, heavy duty construction and high output, these heaters deliver where it counts and are ideal in any application.
Arctic Traveler Canada (ATC) is dedicated to heating, cooling or refrigerating mobile equipment. We’re specialists in mobile climate control and distribute industry leading products as well as design and manufacture custom products for unique applications.
Call us today at 1-800-295-4156 to discuss your mobile HVAC needs.